News

Synthetic Resin roof sheet are becoming more and more popular in the field of roofing materials. Many individual users choose to buy resin tiles and build their own roofs, but they are not very clear about the installation method. Today, the editor of Liansu Resin Tile Factory has compiled a tutorial and precautions for installing resin tiles for everyone, hoping to help everyone.

Safety precautions for installing resin tiles

1. Equip necessary safety facilities: such as safety helmets, safety belts, gloves and other protective tools.
2. Installers must hold relevant work permits.
3. The frame must be firmly installed.
4. If you need to walk on the tiles during installation, try to walk in the middle of the tiles and avoid stepping on the edges of the tiles.

Be careful when installing in bad and extreme weather.

Installation tools and accessories

1. Tools: portable electric drill, electric drill head and sleeve, portable cutting machine, portable polishing machine, tape measure, wrench.
2. Accessories: waterproof cap, waterproof ring, protective pad, self-tapping screws.
3. Accessories: resin glue, resin powder (if drilling holes are not done correctly during construction, mix the two materials and fill them up).

Roof requirements

1. Slope

Synthetic resin tiles are suitable for slope roofs with a slope of 20 to 80 degrees.

2. Purlins

Common purlin materials and sizes (mm): wooden square 60×40, square steel pipe 60×40×3, C-shaped steel 100×50×3. Metal purlins must be brushed with anti-rust oil once and topcoat twice. Wooden purlins must be brushed with anti-corrosion oil or dipped in asphalt oil.

The top purlin is 150mm away from the ridge line to facilitate the installation of ridge tiles, and the bottom purlin is 50 to 70mm away from the eaves. The recommended spacing between main tile purlins is 660mm, and the spacing between large arc main tile purlins shall not exceed 750mm.