News

Synthetic resin tiles can be seen everywhere in our lives. This is a new type of environmentally friendly roofing material, and it is now popular in our lives. However, because this is a new product, some construction workers still do not understand the installation method. Today,LESSO Resin Tile, as the manufacturer responsible for the product, will explain to you how much the slope of the resin tile should be.

The slope of the resin tile is suitable between 20 degrees and 80 degrees. The slope of the sloping roof will affect drainage. The slope of the resin tile is between 20 degrees and 80 degrees, which is a normal drainage slope. If it is lower than the standard range, water may accumulate, thereby increasing the burden on the residence. For concrete roofs, the standard drainage slope is the minimum 5% of the span of the house, which means that the slope of the house with a total width of 100 meters must be above 0.5 meters. If the roof is a tile roof, the standard is above 10° and less than 75°. This is the explanation of the slope of the resin tile installation, and I hope you can gain something.